Search Results

Standard

ASBESTOS AND SYNTHETIC RUBBER SHEET Hot Oil Resistant

1977-01-01

HISTORICAL

AMS3232K

This specification covers a compressed asbestos and synthetic rubber material in the form of sheets and rolls.

Standard

SILICONE RESIN, ELASTOMERIC, OPAQUE Elevated Temperature Cure

1969-05-01

HISTORICAL

AMS3369

Standard

SILICONE RUBBER SPONGE Closed Cell, Medium, Extreme Low Temperature

1977-07-01

HISTORICAL

AMS3193A

This specification covers a silicone rubber sponge in the form of sheet, strip, extrusions, and molded shapes.

Standard

Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature

2001-04-09

HISTORICAL

AMS3193C

This specification covers a silicone rubber sponge in the form of sheet, strip, extrusions, and molded shapes.

Standard

SILICONE RUBBER SPONGE Closed Cell, Medium, Extreme Low Temperature

1985-01-01

HISTORICAL

AMS3193B

This specification covers a silicone rubber sponge in the form of sheet, strip, extrusions, and molded shapes.

Standard

Rubber, Silicone (VMQ) Low Compression Set, Non-Oil-Resistant 65 - 75

2009-05-28

HISTORICAL

AMS3307D

This specification covers a silicone (VMQ) rubber in the form of sheet, strip, and molded shapes.

Standard

SILICONE RUBBER Low Compression Set, Non-Oil-Resistant 65 - 75

1977-01-01

HISTORICAL

AMS3307A

This specification covers a low-compression-set, non-oil-resistant silicone rubber in the form of sheet, strip, and molded shapes.

Standard

Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness

2021-03-16

CURRENT

AMS3307E

This specification covers a silicone (VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7XXX specification.

Standard

Elastomer: Nitrile Rubber (NBR) Synthetic Oil Resistant Sheets, 65 to 75 Type A Hardness for Products in Engine Oil Systems

2021-10-22

CURRENT

AMS3786

This specification covers a nitrile rubber (NBR) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7289 specification.

Standard

Rubber, Cellular, Chemically Blown

1998-07-01

HISTORICAL

AMSR6130

This specification establishes requirements for chemically blown cellular rubber.

Standard

Rubber: Acrylonitrile-Butadiene (NBR) Engine Oil Resistance, 65 to 75 Hardness, for Seals in Aircraft Engine Oil Systems

2020-07-08

CURRENT

AMS7274K

This specification covers an acrylonitrile-butadiene (NBR) rubber in the form of molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes, use the AMS3XXX specification which is intended for that use.

Standard

Rubber: Butadiene-Acrylonitrile (NBR) 65 to 75 Hardness, For Elastomeric Seals in Aircraft Engine Oil Systems

2014-05-08

HISTORICAL

AMS7274J

This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.

Standard

Top Visual Quality (TVQ) O-ring Packings and Gaskets - Surface Inspection Guide and Acceptance Standard

2014-03-23

CURRENT

AS708B

This standard establishes the inspection requirements and acceptance standards for optimum surface finish O-ring packings and gaskets. (This is not an O-ring specification per se.)

Standard

Packaging, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service at 275°F (135°C)

1998-05-01

HISTORICAL

AMSP25732

This specification covers O-ring packings for use with petroleum based hydraulic fluids conforming to MIL-H-5606 and MIL-H-83282 over the temperature range of -65° to 275°F (-54° to 135°C).

Standard

Packaging, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Serivce at 275°F (135°C)

2003-08-05

CURRENT

AMSP25732A

This specification covers O-ring packings for use with petroleum based hydraulic fluids conforming to MIL-H-5606 and MIL-H-83282 over the temperature range of -65° to 275°F (-54° to 135°C).

Standard

Rubber, Ethylene-Propylene, Hydrazine Resistant

2011-09-23

CURRENT

AMSR83412A

This specification covers three types of rubber having good resistance to high and low temperature and hydrazine type propellants, but poor resistance to hydrocarbon oils or solvents. Hydrazines are hazardous chemicals. See “Dangerous Properties of Industrial Materials” by N. Irving Sax.

Standard

Rubber, Ethylene-Propylene, Hydrazine Resistant

1999-07-01

HISTORICAL

AMSR83412

This specification covers three types of rubber having good resistance to high and low temperature and hydrazine type propellants, but poor resistance to hydrocarbon oils or solvents. Hydrazines are hazardous chemicals. See “Dangerous Properties of Industrial Materials” by N. Irving Sax.

Standard

ADHESIVE; ELASTIC Fuel and Oil Resistant - Buna N Type

1947-12-01

HISTORICAL

AMS3685

Standard

SYNTHETIC RUBBER AND CORK COMPOSITION General Purpose Firm

1965-02-01

HISTORICAL

AMS3252D

Standard

SYNTHETIC RUBBER AND CORK COMPOSITION General Purpose Firm

1977-07-01

HISTORICAL

AMS3252E

This specification covers a synthetic rubber and cork composition in the form of sheet, strip, and molded shapes.